OPERATION 5
MHL360 E 5.23
5.8.3 Air conditioning
You should switch the air conditioning system on
at least once a month for a short time to lubri-
cate the compressor.
►
The air conditioning only works when the
diesel engine is running.
►
Switch on the air conditioning system with
the button toggle (130/83). The indicator on
the button toggle (130/83) must light up.
►
Use the knob (130/80), to set the blower
speed to at least position 1. If the blower is
switched off, the air conditioning system
does not start. If the cooling output is high,
the blower speed should also be set high.
►
The button toggles (130/84) on the digital
display (130/85) can be used to adjust the
displayed temperature as required. The
room temperature in the cab falls.
►
The ejectors (127/18-21) can be used to
adjust the air distribution as required.
For maximum cooling:
►
The temperature indicated on the digital
display (130/85) should be lowered with the
minus button toggle (130/84) until the value
"lo" is displayed.
►
Set blower on the highest speed using the
knob (130/80).
►
Close the outside air flap with the button
toggle (130/81). The indicator on the button
toggle (130/81) must light up.
►
Keep the cab closed.
Danger of injury due to refriger-
ant
• Maintenance work on the air con-
ditioning system must only be
carried out by trained specialists.
In an emergency: Administer first
aid, seek treatment from a doctor
BSB50597
19
20
18
18
21
81
82
83
84
85
1
81
80
Fig. 130 Lever for air conditioning system
Air
conditio
To Next Page
Loading...
