Terex MHL360 E - Positioning the Cab

5 OPERATION
5.32 MHL360 E
5.12.2 Positioning the cab
The cab can be moved hydraulically.
ATTENTION
It is preferable not to drive the cab to the top end
position. This improves damping against vibra-
tion and the level of comfort for machine opera-
tors..
Procedure
►
The diesel engine is running, the left arm-
rest is flipped down.
►
If the speed is too low, it is automatically
increased during the adjustment process.
Control panel
►
Press the toggle button corresponding to
the movement direction (143/52, 50, 73,
74) until the desired position is reached.
or function keys
►
Main control display > Function menu.
►
Press the toggle button corresponding to
the function button (142/40, 47, 54, 61) un-
til the desired position is reached.
or multifunction button
►
Main control display > Function menu.
►
Using the mini-joystick, navigate the focus
to the desired direction of travel (142/40,
47, 54, 61).
►
Press button until the desired position is
reached.
54
61
BSB51007
47
40
Fig. 142 Move cab - function menu
I
00
I
0
I
52
50
BSB50601
73
74
Fig. 143 Moving the cab - control panel