Terex MHL360 E - Steering with a Four-Way Control Lever (Optional)

5 OPERATION
5.80 MHL360 E
5.20.3 Steering with a four-way control
lever (optional)
The machine is steered using a four-way con-
trol lever, so there is no steering column in the
cab. The following safety devices are also
included in the installation:
 seat contact switch
5.20.3.1 Seat contact switch
The seat contact switch is installed in addition
to the armrest switch. It serves as an addi-
tional safeguard against accidental activation
of machine movements when standing up or
leaving the cab.
To disable working hydraulics and travel
operation
►
Remove weight from the driver's seat
(stand up)
To enable working hydraulics and travel
operation
►
Apply weight to the driver's seat (sit down)