Terex MHL360 E - Page 231

CARE AND MAINTENANCE 7
MHL360 E 7.11
Application
Designation
Recommended product
Specification, Standards, Quality
Hydraulic
working circuits
Hydraulic fluid
or hydraulic
multigrade oil
Renolin B 15 VG46
or
Renolin Xtreme Temp 46
(Brand label on machine.)
HLP or HVLP
ISO VG 46
The following viscosity limit values
must be observed (according to
ASTM 445):
at 100°C min. 7.0 mm²/s (cSt)
at -10°C < 1300 mm²/s (cSt)
Cleanliness class min. 18/16/13
according to ISO 4406
Biodegradable
hydraulic fluid
based on syn-
thetic ester
PANOLIN
HLP SYNTH 46
HEES ISO VG 46
Filling according to customer speci-
fications. Brand label on machine.
Do not mix biodegradable oils from
different manufacturers.
The same viscosity specifications
apply as for mineral hydraulic flu-
ids.
h Chapter 7.3.4 Biodegradable
hydraulic fluid PANOLIN HLP
SYNTH 46
Drive transmission,
swing gears, wheel
hubs, axles, grab
and magnet gears
Transmission
oil
Titan Supergear SAE
80W-90
SAE 80W-90
API GL-4/GL-5
ZF-TZ-MZ 02B, 05A, 07A, 12B, 16F,
17B
Cab door, lock Special
grease
Hadol LS-EP 5142;
Klüber Isoflex Topas L32
Grease lubrication
system, other lubri-
cating points
Multi-purpose
grease
Renolit Duraplex EP 2
(Can be used at tempera-
tures down to -20°C.)
Lithium complex soap
K P 2P-30
DIN 51,502
Alternative recommendation at
lower operating temperatures down
to -30°C:
Renolit JP 1619
Molykote TTF 52
See also enclosed user information
from Lincoln
Ring gear of slewing
joint: Supplied by
central lubrication
system
-
-
-