Terex MHL360 E - Page 167

OPERATION 5
MHL360 E 5.51
►
In the "Speed and FINE MODE" menu, set
the engine speed to idle (0%) and run the
diesel engine at idle for a short time to al-
low it to cool down.
►
Shut down diesel engine via button toggle
(167/31).
►
Turn the ignition key (167/29) to "0".
►
Wait at least 30 seconds, then turn the
ignition key to "I" and wait about 5 seconds
for the machine control unit to start up.
Press down and hold the button toggle
(167/64) and briefly actuate all hydraulic
levers in order to relieve the hydraulic sys-
tem of pressure.
►
Turn the ignition key (167/29) to "0" and
remove it.
►
Fold up the left armrest (167/4).
►
Lock the cab, as well as all windows and
skylights, to prevent unauthorized access.
►
Clean the machine at regular intervals.