6 RECOVERY, LOADING AND TRANSPORT
6.8 MHL360 E
►
Do not turn the uppercarriage while the
loading machine is on the transport ve-
hicle.
►
Before leaving the loading machine, de-
pressurize all pressure lines.
►
Move all control levers into the neutral posi-
tion.
►
Engage parking brake and swing brake.
►
Switch off the diesel engine. Remove igni-
tion key.
►
Before leaving the driver's seat, flip up the
left armrest.
►
Lock all doors, covers and hoods.
►
Ensure no one is on the machine during
transportation.
►
Prior to transportation, find out about the
route to be taken, especially with regard to
limits for width, height and weight.
►
Exercise special caution when driving un-
der electrical lines, bridges and going
through tunnels.
►
When unloading, proceed with the same
caution as when loading.
Fig. 244 Flat-bed trailer loading
To Next Page
Loading...
