Toa VX-2000SF - Making EV Broadcasts by Way of the Control Input or Internal Timer

Chapter 5: OPERATION
3. GENERAL-PURPOSE BROADCAST
5-32
3.5.2. Making EV broadcasts by way of the control input or internal timer
By activating the EV broadcast patterns assigned to the control input or internal timer, the corresponding EV
messages can be broadcast.
Notes
• TomaketheEVbroadcasttoacurrentlybroadcastzone,theEVmessagepriorityshouldbehigherthanthe
current broadcast or should be assigned the LIFO priority if both broadcasts are the same in priority level. For
the priority settings, refer to
p. 7-30.
• If the assigned EV messages are the same, the message is broadcast to every zone set in all recalled
patterns.
• If the assigned EV messages are different, but the recalled pattern output zones are duplicated, the EV
message assigned the highest priority is broadcast to all duplicated zones, while other recalled messages
are broadcast to the corresponding output zones that are not among the duplicated zones.
[Activation by means of the control inputs]
The EV broadcast having its preset pattern overrides the current broadcast while the corresponding control
input is activated.
[Change by means of the internal timer]
The EV broadcast having its preset pattern overrides the current broadcast during the duration from the start
time to the end time set by the internal timer.