Toa VX-2000SF - Cf Card Recording Methods; Recording by the EV-350 R; Program

Chapter 12: APPENDIX
1. CF CARD RECORDING METHODS
12-2
Data Content
Playback sound data Combination of sentence and silent interval (maximum 128 steps)
Playback method*
1
(one of the four methods)
Output (from output 1 or output 2 or simultaneously from both)*
2
Control data
Program name (program title)*
2
Program sound volume
[Contents to be entered into the program]
*
1
The following 4 Playback methods are available: Continuous Program, Single Program, Repeat, and Endless.
As for the VX-2000 system, however, select the Continuous Program Playback.
*
2
Not related to VX-2000 playback operation.
1. CF CARD RECORDING METHODS
Messages can be recorded on the CF card in either way of using the EV-350R Digital Announcer or using the
PC software program dedicated for the EV-200.
1.1. Recording by the EV-350R
Create the program referring to the descriptions given here.
1.1.1. Program
The word "program" used for the EV-350R represents playback data consisting of both playback sound data
(sentences and silent intervals) and control data (volume levels and playback methods). In the VX-2000 system,
the playback data is referred to as the "EV message."