Chapter 2: PRODUCT DESCRIPTIONS
2. NOMENCLATURE AND FUNCTIONS
2-18
2.11. Equaliser Card VX-200SE
1
1. Mounting connector
Fit this connector into the VX-200SE mounting connector on the circuit board of the VX-200SP or VX-200SZ.
The VX-200SE Equaliser is a 9-band, 1-channel equaliser to be mounted on the circuit board of the VX-200SP
Pilot Tone Detection module or VX-200SZ Impedance Detection module.
Equaliser settings are performed using the PC system software. For the setting instructions, refer to p. 7-37
"8.3. Equaliser Setting" (PC software offline settings).
To Next Page
Loading...
