Toa VX-2000SF - Broadcast Priorities

Chapter 3: SYSTEM OPERATION OUTLINE
8. BROADCAST PRIORITIES
3 -11
FIFO/LIFO* when
same priority level
•Broadcasts shown
side-by-side are of the
same priority level.
•Either FIFO or LIFO
can be set if same
priority level.
•Same priority level if
same Message Type.
•Always LIFO for the
same level.
•Broadcasts shown
side-by-side are of the
same priority level.
•Either FIFO or LIFO
can be set if same
priority level.
•AlwaysLIFO.
8. BROADCAST PRIORITIES
Broadcast priorities are broadly divided into 4 categories, which are classified in the following priority order:
1. Emergency RM: Broadcasts from the Remote Microphone designated as Emergency type.
2. Emergency EV: EV messages (Reset, Evacuation and Alert messages) set as Emergency in EV
Message Type.
3. General: Broadcasts from the Remote Microphone designated as General type, broadcasts of
general-purpose EV messages, and broadcasts from sound sources not set as BGM.
4. BGM: Broadcasts from sound sources set as BGM.
Use the PC software to set priorities. Refer to p. 7-30 for the setting procedure.
[Setting Example]
Priority order
classified by category
Emergency RM
Emergency EV
General
BGM
Setting within the category
RM-1 (Emergency) RM-2 (Emergency)
BGM 1 BGM 2
Reset 1 Reset 2
Evacuation 1 Evacuation 2
Alert 1 Alert 2
RM 3 (General) General EV1
RM 4 (General) General EV2
PM-660U
Priorities within
the same category
Priority high
Priority low
Determined according
to Message Type.
"Reset"
"Evacuation"
"Alert"
in order of high to low.
Priority high
Priority low
No priority order within
category.
All same priority level.
* FIFO: First-in-first-out priority
* LIFO: Last-in-first-out priority
Priority
High
Low