Toa VX-2000SF - Emergency

Chapter 4: FUNCTIONS
3. ACTIVATION ITEMS
4-7
3.1.1. Emergency
[Emergency activation]
• Whenusinganemergency/general-purposeRemoteMicrophone
When this microphone is used, the emergency mode is activated. If emergency patterns are assigned, the EV
message set in the emergency broadcast pattern is broadcast to the pre-selected zones.
• Whenusingageneral-purposeRemoteMicrophone
Emergency mode can only be activated.
[Emergency EV messages (Alert and Evacuation messages)]
The EV message is broadcast to the pre-selected zones.
Emergency Activation button
• General-purpose mode: OFF
• Emergency mode: Lights red.
Emergency Activation button
Emergency LED
• General-purpose mode: OFF
• Emergency mode: Lights red.
[RM-200XF] [RM-200X]
EV Broadcast LED
EV Enable LED
Alert EV key
• EV message broadcasting: Lights green.
• No EV message broadcasting: OFF
Pre-selected zones not used by other equipment.
System Status
Broadcasts made to
pre-selected zones
from other equipment.
Message in the same EV
being currently broadcast
Other equipment broadcast priority low.
Broadcasting message priority high.
Broadcasting message priority low.
Other equipment broadcast
priority high.
All zones
OFF
EV Enable LED
Flashes green.
Flashes orange.
Flashes green.
Flashes orange.
Flashes green.
Part of zones
Broadcast Possible:
Broadcast Impossible:
(Broadcasts can be made
to the remaining zones.)
[Emergency Reset]
General-purpose broadcast mode is restored. If the Reset EV message has been assigned, the message is
broadcast to the pre-selected zones.
Unused
Emergency Reset key