Toa VX-2000SF - Equaliser Card VX-200 SE; Control Input Module VX-200 SI; Control Output Module VX-200 SO

Chapter 13: SPECIFICATIONS
2. SPECIFICATIONS
13-22
2.12. Control Input Module VX-200SI
Power Source
Supplied from VX-2000SF
Current Consumption
Under 100 mA
Control Input 16 inputs, no-voltage make contact, open voltage: 24 V DC,
short circuit current: under 10 mA, RJ45 connector
Finish
Panel: Surface-treated steel plate
Dimensions
30.5 (w) x 132.6 (h) x 290.3 (d) mm
Weight
200 g
Applicable Model
VX-2000SF
2.13. Control Output Module VX-200SO
Power Source Supplied from VX-2000SF
Current Consumption Under 150 mA
Control Output 16 outputs, no-voltage make contact, contact capacity: 28 V DC, 1 A,
RJ45 connector
Finish Panel: Surface-treated steel plate
Dimensions 30.5 (w) x 132.6 (h) x 290.3 (d) mm
Weight 250 g
Applicable Model VX-2000SF
2.11. Equaliser Card VX-200SE
Note: The design and specifications are subject to change without notice for improvement.
Note: The design and specifications are subject to change without notice for improvement.
Note: The design and specifications are subject to change without notice for improvement.
Power Source Supplied from VX-200SZ, VX-200SP
Current Consumption Under 50 mA
Equaliser Centre Frequency 80 Hz, 125 Hz, 250 Hz, 500 HZ, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 12 kHz
Gain Range ±12 dB, adjustable in 2 dB steps
Dimensions 110 (w) x 90 (h) x 11.7 (d) mm
Weight 50 g
Applicable Model VX-200SZ, VX-200SP