Toa VX-2000SF - Surveillance Frame VX-2000 Sf

Chapter 13: SPECIFICATIONS
2. SPECIFICATIONS
13-19
2.8. Surveillance Frame VX-2000SF
Power Source 24 V DC (operating range: 20 – 40 V DC)
M3.5 screw terminal, distance between barriers: 8.8 mm
Current Consumption Under 2 A (40 V DC)
Number of Module Slot 10
Usable Module VX-200SZ, VX-200SP, VX-200SI, VX-200SO
Frequency Response 20 Hz – 20 kHz
Signal to Noise Ratio Over 60 dB
Distortion Under 0.5%
Cross Talk Under –60 dB (1 kHz, 0 dB*)
Audio Link Input/Output Number of audio busses: 4
0 dB*, electronically balanced, RJ45 female connector
Twisted-pair straight cable (TIA/EIA-586A standard)
Standby Amplifier Link RJ45 female connector for connecting the VP-2000 series or VP-3000
series Power Amplifier
Twisted-pair straight cable (TIA/EIA-586A standard)
Communication System VX-2000, VX-2000SF: RJ45 female connector x 2, LONWORKS RS-485
VX-2000DS, VX-3000DS: RJ45 female connector x 2,
Twisted-pair straight cable (TIA/EIA-586A
standard)
Operating Temperature 0 to +40°C
Finish Panel: Surface-treated steel plate, black (30% glossy), paint
Dimensions 482 (w) x 132.6 (h) x 337 (d) mm
Weight 5.6 kg
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.
•Optionalproduct
Isolation transformer: IT-450 (audio link output)
•Accessories
Rack mounting screw (5 x 12) ....................................... 4
Fiber washer .................................................................. 4
Blank panel .................................................................... 9
Rack mounting bracket (preinstalled on the unit) .......... 2
Standby amplifier cable (3 m) ........................................ 1
Blank panel mounting screw ........................................ 18