Toa VX-2000SF - Audio Input Module with Control Input VX-200 XI

Chapter 13: SPECIFICATIONS
2. SPECIFICATIONS
13-18
2.7. Audio Input Module with Control Input VX-200XI
Power Source Supplied from VX-2000
Current Consumption Under 30 mA
Input Sensitivity
(Rated Output –20 dB)
MIC: –70 to –42.5 dB* (adjustable)
LINE: –20 to +7.5 dB* (adjustable)
MIC or LINE selectable by the built-in switch
Low Cut Filter (100 Hz) 9 to 15 dB attenuation (adjustable)
High Cut Filter (10 kHz) 8 to 14 dB attenuation (adjustable)
Distortion Under 0.5%
Frequency Response 50 Hz – 20 kHz
Phantom Power 15 V (open), 6 V (current consumption 3.3 mA)
Control Input No-voltage make contact, open voltage: 17 V DC,
short circuit current: Under 5 mA
Input Connector RJ45 female connector
Twisted-pair straight cable (TIA/EIA-568A standard)
Finish Panel: Aluminum, hairline
Dimensions 35 (w) x 78 (h) x 88 (d) mm
Weight 70 g
Applicable Model VX-2000
•Accessories
Mounting screw ......................................... 2
•Optionalproduct
Isolation transformer: IT-450
* 0 dB = 1 V
Note: The design and specifications are subject to change without notice for improvement.