Chapter 12: APPENDIX
1. CF CARD RECORDING METHODS
12-4
[Message Program Example]
The programs shown in the above example operate as follows.
Alert message (Program No. 1)
[Continuous program playback method]
Step No.
001
Playback
002
003
004
Stop
Activation
Program P001
Silent interval 3 seconds
M003
1st sentence
A001
2nd sentence
A002
3rd sentence
A003
1.1.3. Setting Example
[Message Program/Sentence Composition Example]
Note
EV messages are divided into 4 types in the VX-2000 system: Alert, Evacuation, Reset, and General. The
message type must be set for each EV message number using the PC software. When recording, message
types set with the PC software must correspond to the message contents. For details of the setting, refer to
p. 7-28.
Program No.
P001
P002
P003
P004
P005
P006
P007
P008
VX unit's Message No.
Message 1
Message 2
Message 3
Message 4
Message 5
Message 6
Message 7
Message 8
Playback method
Sentence No. or Silent Section
A001, A002, M003, A003
A011, A012, M002, A013
A021, A022, M002, A023
A031
A041
A051, M001, A052, M002
A061, M001, A062, M002
A071
EV message type
Alert
Evacuation
Reset
Continuous
Program Playback
General
(General-purpose
broadcast)
To Next Page
Loading...
