Toa VX-2000SF - Cf Card Recording Contents

Chapter 12: APPENDIX
1. CF CARD RECORDING METHODS
12-3
Sentence A001
Sentence A002
Sentence A003
Sentence A004
·
·
·
Sentence A128 *
P001 P002 P003 P008
A003
A002 Step 1
Step 2
Step 3
Step 4
Step 128
M015
(Silent interval
15 seconds)
A128
Sentence
Program ( Up to 8 Programs )
Card A
Playback sound data /up to 128 steps
(including silent intervals)
Control data Control data Control data Control data
Up to 512 sentences can
be created depending on
the setting of the EV-350R.
*
Notes
•In the VX-2000 system, only up to 8 EV messages can be broadcast per EV-200 unit although more than 8
messages can be recordedand broadcast when the EV-350R is used.
•Toperformsingleprogramplaybackorrepeatplayback,thebusyoutputforprogramorrepeatintervalneeds
to be set. When wishing to output a busy signal between messages, set the busy output to ON.
The output is factory-preset to ON.
1.1.2. CF Card Recording Contents
Up to 128 sentences (up to 512 sentences depending on the EV-350R setting) and 8 programs can be recorded
on the CF card. Programs P001 – P008 correspond to EV messages 1 – 8. When EV Message 1 is played back
in the VX-2000, playback data set in P001 is recalled.