EasyManua.ls Logo

Toa VX-2000SF - Page 11

Toa VX-2000SF
328 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
[All units]
• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric
shock.
• Notecorrectpolarity(positiveandnegativeorientation)whenconnectingthepowersupplycord.Reversed
polarity connections will cause damage to the amplifier or car.
• Installtheunitonlyinstablelocations,andmakeappropriatearrangementstopreventitfromfallingdownor
rolling cross the floor. If it falls down or moves, this may cause personal injury and/or property damage.
• UsethededicatedACadapterorDCpowersupplyunitfortheunit.Notethattheuseofotheradaptermay
cause a fire.
• Havetheunitcheckedperiodicallybytheshopfromwhereitwaspurchased.Failuretodosomayresultin
corrosion or damage to the unit that could cause the unit to fall, possibly causing personal injury.
[VX-2000DS, VX-3000DS only]
• Neverpluginnorremovethepowersupplyplugwithwethands,asdoingsomaycauseelectricshock.
• Whenunpluggingthepowersupplycord,besuretograspthepowersupplyplug;neverpullonthecorditself.
Operating the unit with a damaged power supply cord may cause a fire or electric shock.
• Donotblocktheventilationslotsintheunit'scover.Doingsomaycauseheattobuildupinsidetheunitand
result in fire.
• ContactyourTOAdealerastothecleaning.Ifdustisallowedtoaccumulateintheunitoveralongperiodof
time, a fire or damage to the unit may result.
• Makesuretoobservethefollowinghandlingprecautionssothatafireorpersonalinjurydoesnotresultfrom
explosion of the battery.
· Do not short, disassemble, heat nor put the battery into a fire.
· Avoid using both new and old batteries together.
· Do not solder a battery directly.
· Be sure to use the specified type of batteries.
· Note correct polarity (positive and negative orientation) when inserting a battery in the unit.
· Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing batteries.
[VX-200PS only]
• Neverpluginnorremovethepowersupplyplugwithwethands,asdoingsomaycauseelectricshock.
• Whenunpluggingthepowersupplycord,besuretograspthepowersupplyplug;neverpullonthecorditself.
Operating the unit with a damaged power supply cord may cause a fire or electric shock.
• Donotblocktheventilationslotsintheunit'scover.Doingsomaycauseheattobuildupinsidetheunitand
result in fire.
• ContactyourTOAdealerastothecleaning.Ifdustisallowedtoaccumulateintheunitoveralongperiodof
time, a fire or damage to the unit may result.
[VX-2000SF only]
• Donotblocktheventilationslotsintheunit'scover.Doingsomaycauseheattobuildupinsidetheunitand
result in fire.
[VP-2000 series amplifiers, VP-3000 series amplifiers only]
• Donotblocktheventilationslotsintheunit'scover.Doingsomaycauseheattobuildupinsidetheunitand
result in fire.
• Donotoperatetheunitforanextendedperiodoftimewiththesounddistorting.Thisisanindicationofa
malfunction, which in turn can cause heat to generate and result in a fire.
• ContactyourTOAdealerastothecleaning.Ifdustisallowedtoaccumulateintheunitoveralongperiodof
time, a fire or damage to the unit may result.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION

Table of Contents

Other manuals for Toa VX-2000SF

Related product manuals