4
1. OPERATING THE REMOTE MICROPHONE
BY USING A PASSWORD
....................................................................... 5-2
1.1. Entering a Password .......................................................................................... 5-2
1.2. Bringing the Remote Microphone into Password Entry Status ......................... 5-2
2. EMERGENCY BROADCASTS .............................................................. 5-3
2.1. Dual-Origin EV Message Broadcast ................................................................. 5-3
2.2. Single-Origin EV Message Broadcast (Sequential Operation) ......................... 5-8
2.3. Emergency Mode Activation and Reset ........................................................... 5-12
3. GENERAL-PURPOSE BROADCAST .............................................. 5-19
3.1. Making Announcements from the Remote Microphone .................................. 5-20
3.2. Making BGM Broadcasts ................................................................................ 5-22
3.2.1. Recalling base patterns using the internal timer ................................... 5-22
3.2.2. Recalling base patterns from the Remote Microphone ......................... 5-24
3.3. Changing the Input Sensitivity and Output Volume Level ............................... 5-26
3.3.1. Changing the input sensitivity and output volume level
at the Remote Microphone .................................................................... 5-26
3.3.2. Changing the input sensitivity and output volume
by way of the control input or internal timer .......................................... 5-29
3.4. Interrupt Broadcasts ........................................................................................ 5-30
3.5. EV Message Broadcasts ................................................................................ 5-31
3.5.1. Making EV broadcasts from the Remote Microphone .......................... 5-31
3.5.2. Making EV broadcasts by way of the control input or internal timer ..... 5-32
4. AUDIO MONITORING .............................................................................. 5-33
4.1. Monitoring by means of a Remote Microphone ............................................... 5-33
4.2. Monitoring by means of the VX-2000's MONITOR OUT Terminal .................. 5-33
5. FAILURE OUTPUT DETECTION ....................................................... 5-34
5.1. Failure Output Indication ................................................................................. 5-34
5.2. Monitoring Log List ......................................................................................... 5-37
1. PROCEDURE TO SYSTEM OPERATION ...................................... 6-2
1. SETUP PROCEDURE (from installation to settings) ........... 7-2
2. HARDWARE REQUIREMENT ................................................................ 7-4
3. SOFTWARE INSTALLATION ................................................................. 7-5
4. SCREEN AND MENU DESCRIPTIONS ........................................... 7-8
4.1. Screen ................................................................................................................ 7-8
4.2. Menu .................................................................................................................. 7-9
5. VX-2000 SETTING SOFTWARE ACTIVATION ......................... 7-10
Chapter 5: OPERATION
Chapter 6: FLOWCHART FROM SYSTEM SETUP TO OPERATION
Chapter 7: PC SOFTWARE OFFLINE SETTINGS
To Next Page
Loading...
