OPERATING THE TRANSCEIVER
VIEWING INFORMATION ABOUT YOUR TRANSCEIVER
ENVOY™ TRANSCEIVER REFERENCE MANUAL 71
Related links:
Switching between basic and advanced views on page 95
Selecting information to be shown in a status area on page 28
Viewing IP information
The USB interface on the control point supports the RNDIS protocol, which provides
a virtual IP connection over USB. The Envoy™ Transceiver connects to TPS via this
connection.
To view the IP information:
1 From the main menu, select (Information), then (IP Connectivity).
You can view the following information for the RFU and control point:
• IP address
• MAC address
•alias
•network mask
•DHCP client
• default gateway
You can view the following information for the USB interface on the control
point:
• IP address
•network mask
•DHCP server
NOTE: If you want to change any of this information, log in to admin
level, then go to Settings > Connectivity.
1 Press (Close).
Related links:
Logging in to admin level on page 97
Settings > Connectivity on page 258
To Next Page
Loading...
Need help?
General
