CDM-625 Advanced Satellite Modem Revision 13
Front Panel Operation MN-CDM625
5–35
Use the ◄ ►arrow keys to select the port to edit, and then use the ▲▼ arrow keys to edit the
number of channels for that port. The cumulative data rate calculates and displays as you edit
the number of channels.
After pressing ENTER, a submenu appears based on the port that the cursor had been on (where
#X is the tributary port number):
QDI Drp-Ch: 1 2 3 4 5 6 7 8 >
Port#X TS: 01 02 03 04 11 12 13 14
QDI Ins-Ch: 1 2 3 4 5 6 7 8 >
Port#X TS: 01 02 03 04 11 12 13 14
Each display can only show up to eight channels. A
> character displays at the top right-hand
side of either screen to indicate that there are more channels to view beyond Channel 8 (as
shown in the preceding examples). Use the
►arrow key to scroll further to more channels.
Use the
◄ ►arrow keys to select a timeslot, and then use the ▲▼ arrow keys to edit that
timeslot value. Press ENTER when done.
To Next Page
Loading...
