Comtech EF Data CDM-625 - E.1.2 Terminal Emulator Considerations; E.1.2.1 Using the Putty Terminal Emulator

CDM-625 Advanced Satellite Modem Revision 13
Appendix E MN-CDM625
E–2
E.1.2 Terminal Emulator Considerations
1. For best results, Comtech EF Data recommends PuTTY or TeraTerm as the
preferred terminal emulators.
2. Use of the HyperTerminal terminal emulator is not supported or recommended.
3. The numeric keypad’s ENTER key may not work on some terminal emulators.
E.1.2.1 Using the PuTTY Terminal Emulator
First, you must define your Telnet session connection:
• For Connection type, select Telnet;
• For Host Name (or IP Address), enter the interface IP Address (e.g., 192.168.1.11);
• For Port, enter 107;
• Click [Open] to proceed.