CDM-625 Advanced Satellite Modem Revision 13
Appendix D MN-CDM625
D–27
D.5.4 Unit Parameters
Parameter
Type
Number of
Arguments
Description of Arguments
Response to
Command
Used set the user’s Local/Remote status in the form x, where:
0=Local
1=Serial Remote (RS-232/RS-485)
2=reserved
3=Ethernet Remote
Example: LRS=1 (selects Serial Remote)
(see Description of
Arguments)
The CDM-625 is designed to be a ‘ drop-in’ replacement for the CDM-600 or CDM-600L modems. In order
for c omplete modem E mulation, al l par ameters, i ncluding t he E ID (equipment I D) mus t be t hat of t he
modem it is emulating. This parameter permits the CDM-625 modem to be configured that way.
The format for the argument is x, where x is:
0= full capability CDM-625 modem (default)
1= to emulate the CDM-600 modem
2= to emulate the CDM-600L modem
(see Description of
Arguments)
Control the state of front-panel lockout in the form x, where:
0= no lockout
1= front panel lockout active.
Disable the lockout by either FPL=0, or by setting into local mode using LRS=0.
(see Description of
Arguments)
Active software image in the form x, where:
1=Bulk Image #1 currently active
2=Bulk Image #2 currently active
(see Description of
Arguments)
Sets or queries the user-defined Circuit ID string, which is a fixed length of 40 characters.
Valid characters include:
Space ( ) * + – , . / 0 9 and A thru Z
(see Description of
Arguments)
A date in the form ddmmyy (European format), where
dd = day of the month (01 to 31)
mm = month (01 to 12)
yy = year (00 to 99)
Example: DAY=240457 (April 24, 2057)
(see Description of
Arguments)
To Next Page
Loading...
