CDM-625 Advanced Satellite Modem Revision 13
IP Packet Processor Option MN-CDM625
18–7
• The user-supplied Network Management System (NMS) – The software that runs on
the manager.
18.3.2.2 Telnet Interface
• Sect. 6.4 Telnet Interface (Chapter 6. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
• Appendix D. REMOTE CONTROL
• Appendix E.
TELNET COMMAND LINE INTERFACE (CLI) OPERATION
Comtech EF Data provides a Telnet interface for the purpose of equipment monitor and control
(M&C) using either the standard remote control protocol or, when the optional IP Packet
Processor is installed
and enabled, the Telnet Command Line Interface (CLI).
18.3.2.3 Web Server (HTTP) Interface
Sect. 6.5 Web Server (HTTP) Interface (Chapter 6. ETHERNET-BASED REMOTE
PRODUCT MANAGEMENT)
The embedded Web Server (HTTP) application provides an easy to use interface designed for
optimal performance when using Microsoft’s Internet Explorer Version 9.0 or higher. The
interface features enhanced functionality when the CDM-625 is equipped with the IP Packet
Processor.
To Next Page
Loading...
