Comtech EF Data CDM-625 - Page 507

CDM-625 Advanced Satellite Modem Revision 13
Appendix D MN-CDM625
D–37
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Tx BERT
State
BTX=
1 byte, value of
0 or 1
Command or Query.
Tx BERT State in the form x, where:
0 = Off
1 = On
Example: BTX=1 (Tx BERT On)
BTX=
BTX?
BTX#
BTX?
BTX=x
(see Description of
Arguments)
Rx BERT
State
BRX=
1 byte, value of
0 or 1
Command or Query.
Rx BERT State in the form x, where:
0 = Off
1 = On
Example: BRX=1 (Rx BERT On)
BRX=
BRX?
BRX#
BRX?
BRX=x
(see Description of
Arguments)
Tx BERT
Pattern
TBP=
1 byte
Command or Query.
Tx BERT Pattern, in the form x, where:
0=space
1=mark
2=1:1
3=1:2
4=63
5=511
6=2047 (default)
7=2047R (or 2047 Alternate)
8=Mil-188
9=2^15-1
A=2^20-1
B=2^23-1
Example: TBP=6 (Tx BERT Pattern is 2047)
TBP=
TBP?
TBP#
TBP?
TBP=x
(see Description of
Arguments)
Rx BERT
Pattern
RBP=
1 byte
Command or Query.
Rx BERT Pattern, in the form x, where:
0=space
1=mark
2=1:1
3=1:2
4=63
5=511
6=2047 (default)
7=2047R (or 2047 Alternate)
8=Mil-188
9=2^15-1
A=2^20-1
B=2^23-1
Example: RBP=6 (Rx BERT Pattern is 2047)
RBP=
RBP?
RBP#
RBP?
RBP=x
(see Description of
Arguments)