Comtech EF Data CDM-625 - Page 509

CDM-625 Advanced Satellite Modem Revision 13
Appendix D MN-CDM625
D–39
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to
Query
Demo Time
Remaining
N/A
6 bytes
Query only.
Demo time remaining in the form ddhhmm,
dd = days (00 to 30)
hh = hours (00 to 23)
mm = minutes (00 to 59)
Example: DMT=032312 (3 days 23 hours 12 minutes)
N/A
DMT?
DMT=ddhhmm
(see Description of
Arguments)
Demo Mode
DMM=
1 byte, value
of 0 thru 2
Command or Query.
Demo Mode Enable/Disable in the form x, where:
0 = Disabled
1 = Enabled
2 = Expired
DMM=
DMM?
DMM*
DMM#
DMM?
DMM=x
(see Description of
Arguments)
Medium-
Earth Orbit
MEO=
1 byte
Command or Query.
Medium Earth Orbit Enable/Disable in the form x, where:
0 = Disabled
1 = Enabled
MEO=
MEO?
MEO=x
(see Description
of Arguments)
Antenna
Handover
AHO=
1 byte
Command or Query.
Antenna Handover Enable/Disable in the form x, where:
0 = Disabled
1 = Enabled
AHO=
AHO?
AHO=x
(see Description of
Arguments)
Antenna
Handover
Mode
AHM=
1 byte
Command or Query.
Antenna Handover Mode in the form x, where:
0 = Manual
1 = Auto
AHM=
AHM?
AHM=x
(see Description of
Arguments)
Antenna
Handover
Differential
Path Delay
AHD=
3 bytes
Command or Query.
Differential Path Delayin the form +xx (-13 to +13)
Example: AHD=+12 (Lead 12)
AHD=-03 (Lag 3)
AHD=
AHD?
AHD=xx
(see Description of
Arguments)
Time Protocol
Enable
TPE=
1 byte
Command or Query.
Used to disable or enable the Time Protocol, where:
0 = Time Protocol disabled
1 = Time Protocol enabled
Example: TPE=1 (Time protocol enabled)
TPE=
TPE?
TPE?
TPE=x
(see Description of
Arguments)