E-GENIUS
110
AV7000 LINEAR CAMERA
generated by a photoeye or a hardware signal from the sorter.
In a singulated system, a Side-by-Side (SBS) is an error condition in which these conditions are
violated. The end-user wants to know when this happens (when their parcel flow has
inadvertently become “non-singulated”), and Datalogic systems can tell them this by means of
an SBS indicator in the Serial or Ethernet “host message.”
Dimensioner Results Tracking
NOTE: If enabled, Object Detection parameters are revealed. See “Side by
Side Verification Settings (Dimensioner only)” on page 126.
To Next Page
Loading...
Need help?
General
