E-GENIUS
116
AV7000 LINEAR CAMERA
ONLINE MODE
Online Mode Settings
Online Continuous-Decoding
Click the check-box to enable continuous decoding. When checked, the camera will try to
decode an unlimited number of frames between an On and Off trigger, or until transmit point
is reached.
Filter Incoming Duplicate Codes under Advanced Decode is internally
enabled to prevent the internal barcode buffer from filling up. Image Saving features are
disabled. This feature is useful when a conveyor stops frequently. The same frame does not fill
up the internal frame buffer, so when the conveyor starts again any frame afterwards is
decoded.
To Next Page
Loading...
Need help?
General
