E-GENIUS
210
AV7000 LINEAR CAMERA
Code Definition Number
Click the drop-down to select from 1 to 5.
Item Alignment
Click the drop-down to select, None, Left or Right.
tem Alignment Length
Enter the number of characters to fill with the Align Filler Character.
Align Length is the number of characters to fill if the counter value if less than the maximum
number. Its main purpose is to make the field length consistent no matter what the counter
value.
For example:
Counter Max Number (Counter Module) = 10000
Counter Current Value = 500
Align Filler Char = X
Counter shown in Image Name = XX500 (Left Alignment) or 500XX (Right Alignment)
Item Alignment Filler
Enter a filler character to use with Align Length.
GLOBAL ITEMS:
Select a global item from those available in the drop-down list. This option is available when
Item Type > Global has been selected. Selections Include:
•
Total Read Mask: Indicates the complete reading mask related to all codes read during
the reading phase or which camera read any code
•
Total Read Count: Indicates the sum of all Code-related Total Reading Counts of each
code read during the reading phase
•
Sequence Number: Indicates the sequential number assigned to the package
•
Hours: Indicates hour the code was scanned
•
Minute: Indicates minute the code was scanned
•
Seconds: Indicates second the code was scanned
•
Day: Indicates day of the month the code was scanned
•
Month: Indicates month the code was scanned
•
Year: Indicates year the code was scanned
NOTE: More information about these metrics is found in the WebSentinel
PLUS Investigator Installation and Configuration documentation.
NOTE: More information about these metrics is found in the WebSentinel
PLUS Investigator Installation and Configuration documentation.
To Next Page
Loading...
