What to do if Datalogic AV7000 has maximum application restarts?
Cycle the unit’s power. If software was recently loaded, try to reload the new software. If the error persists, contact Datalogic Support.
What does 'RangeFinder status not understood' mean on my Datalogic Digital Camera?
If the 'RangeFinder status not understood' message appears on your Datalogic Digital Camera, it indicates that the RangeFinder software is out of date. Load the appropriate software into the RangeFinder.
What to do if RangeFinder is not online for Datalogic AV7000 Digital Camera?
Verify the RangeFinder has power. Verify the network port of the RangeFinder is connected to the Ethernet Focus port of one of the cameras. Cycle the RangeFinder power. If the error persists, replace the RangeFinder or contact Datalogic Support. If the RangeFinder is not the position sensor being used, select the appropriate position sensor.
What to do if there is no ACK from Rangefinder after parameter update (Datalogic AV7000 Digital Camera)?
Check the Ethernet connection with the RangeFinder.
What to do if Datalogic AV7000 Digital Camera LogManager can't open a log file?
Verify logging options.
What to do if the Datalogic Digital Camera shows 'Expected Camera is Offline'?
To resolve the 'Expected Camera is Offline' error on your Datalogic Digital Camera, verify the offline camera has power and that the SyncNet cables are properly connected between the offline camera and the next camera. You can also cycle the unit’s power. If the error persists, consider replacing the camera or contacting Datalogic Support.
Why Datalogic Digital Camera shows 'Failed to Write Image to FTP Server'?
The Datalogic Digital Camera might display 'Failed to Write Image to FTP Server' because the external FTP server is offline, or the camera Image port is not connected to the network. Verify the external FTP server is up and running and ensure the camera image port is connected to the appropriate network correctly.
What to do if my Datalogic Digital Camera says 'Image Transfer Falling Behind'?
If the Datalogic Digital Camera displays 'Image Transfer Falling Behind. Check Connection Speed', it means the Ethernet connected to the camera Image port (cables, switches, etc.) are not Gigabit capable. Verify the switches are Gigabit capable and the cables are at least Cat5e. Verify the LEDs of the camera Image port is indicating a Gigabit connection. Verify the Ethernet are not routed with AC wiring and are not excessively long.
What to do if Datalogic AV7000 Digital Camera failed to set space notification?
Check the encoder/tachometer resolution. Contact Datalogic Support if the encoder/ tachometer resolution is set properly.
What to do if there is an error configuring the decode engine of Datalogic AV7000 Digital Camera?
Make sure all decode engine settings are correct. Contact Datalogic Support.
General| Brand | Datalogic |
|---|---|
| Model | AV7000 |
| Category | Digital Camera |
| Language | English |
To Next Page
