Product Reference Guide 93
Chapter 7
Programming
Introduction to Label Programming
The programming bar code labels contained in this manual will allow you to
customize and configure features and settings for your scanner (scanner/
scale). To ensure full compatibility and proper function, use only the program
-
ming bar codes in this manual and other product-specific publications to pro-
gram scanner features.
This manual has been developed to make it quick and easy for users of all lev-
els to find the information needed to understand and configure features. The
following descriptions will help you to determine where to go from here.
Understanding the Basics
If you have little or no prior experience with programming using bar code
labels, you should review the first few pages of this section to familiarize your
-
self with the basics of scanner programming before performing any changes to
your configuration.
Using a Bar Code Mask
The programming bar codes in this manual have been placed as multiples per
page. In order to present them only one at a time to the scanner, a bar code
mask is provided on the opposite side of this page.
Going Green
Thank you for using the bar code mask on the opposite side of this page. This
manual has been formatted to minimize the quantity of pages needed to pro
-
vide all of the programming bar codes available for this product.
To Next Page
Loading...
