Datalogic Magellan 9300i User Manual

Enter/Exit Programming Mode Interface Related Features
210 Magellan™ 9300i / 9400i Scanners
Keyboard Interface Selection
Remember to cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
CAUTION
Great care should be taken to select the correct interface type,
since you can cause damage to the scanner and/or POS termi
-
nal by attempting to change to an incompatible interface.
ALWAYS make interface selections with the host cable DIS
-
CONNECTED.
Interface Type = USB Keyboard
000135(CR)

Datalogic Magellan 9300i Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Standard interfaces	RS-232
Connectivity technology	Wired
Product color	Black, Grey
Built-in display	No
Sustainability certificates	RoHS

Weight and Dimensions

Weight	- g