Datalogic Magellan 9300i - PIR;CT Auxiliary Port Baud Rate

Scale Features Enter/Exit Programming Mode
Product Reference Guide 181
PIR/CT Auxiliary Port Baud Rate
This feature specifies the baud rate of the auxiliary port when operating in PIR/
CT Mode.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
This setting is valid ONLY when Auxiliary Port Mode on
page 177 is set to PIR/CT + Diagnostics Reporting.
PIR/CT Auxiliary Port Baud Rate = 1200
PIR/CT Auxiliary Port Baud Rate = 2400
PIR/CT Auxiliary Port Baud Rate = 4800
PIR/CT Auxiliary Port Baud Rate = 9600
051604(CR)
051603(CR)
051602(CR)
051601(CR)