Scale Features Enter/Exit Programming Mode
Product Reference Guide
175
Adaptive Scale LED Option
Defines which LED is used for adaptive scale indication.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Adaptive Scale LED Option = Zero LED
Adaptive Scale LED Option = Scale Sentry LED
DEFAULT
To Next Page
Loading...
