Enter/Exit Programming Mode Interface Related Features
212 Magellan™ 9300i / 9400i Scanners
IBM Features
IBM Interface Options
IBM interfaces offer specific control over interaction with certain devices.
Options for this feature are as follows:
• FULL host interface support — Accepts scanner and scale configuration
host commands.
• Ignore host interface configuration of scanner and scale — Ignores all
scanner and scale configuration host commands.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
The USB OEM interface provides its own set of
options. Refer to the feature, USB OEM Interface
Options, in this section.
IBM Interface Option = Full Host Interface Support
IBM Interface Option = Ignore Host I/F Config of Scanner &
Scale
DEFAULT
To Next Page
Loading...
