Datalogic Magellan 9300i - Coupon Label Priority Timer

Enter/Exit Programming Mode
Product Reference Guide 283
Coupon Label Priority Timer
This feature sets the duration of the UPCA / DataBar coupon label priority timer.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Coupon Label Priority Timer = 0.1 Seconds
Coupon Label Priority Timer = 0.2 Seconds
Coupon Label Priority Timer = 0.3 Seconds
Coupon Label Priority Timer = 0.4 Seconds
Coupon Label Priority Timer = 0.5 Second
Coupon Label Priority Timer = 1 Second
037F0A(CR)
037F14(CR)
DEFAULT
037F1E(CR)
037F28CR)
037F32(CR)
037F64CR)