Enter/Exit Programming Mode
Product Reference Guide
431
PDF 417 Read Option
This feature specifies an additional read control option for PDF 417 bar codes.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
PDF 417 Read Option = None
PDF 417 Read Option = Turn Off Codeword
Length Checking
DEFAULT