500 Magellan™ 9300i / 9400i Scanners
• Label length including check character and excluding prefix character
must meet requirements imposed by the main scanner’s fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character ‘@’
• Example: ‘@144769254’
Code 93
• Prefix must be an ASCII character ‘&’
• Label length excluding prefix character must meet requirements imposed
by the main scanner’s fixed or variable label length control for this sym
-
bology type.
• Example: ‘&Code93-test’
GS1 DataBar Omnidirectional
• Prefix must be ASCII characters ‘R4’
• Check character must be included in label
• Application identifier “01” must follow the prefix and precede the base
label
• Label length excluding prefix characters must be 16 characters.
• Example: ‘R40101044123456789’
GS1 DataBar Expanded
• Prefix must be ASCII characters ‘R4’
• Label length excluding prefix characters must be at least 1 character.
Maximum length is the maximum label size supported by the scanner.
• The format of the label must not be of the same format as RSS-14 (appli-
cation id ‘01’ & length equal to 16)
• Example: ‘R4002900123456789083103001750’
Standard 2 of 5 (S 2 of 5)
• Prefix must be ASCII character ‘s’
• Label length excluding prefix character must meet requirements imposed
by the main scanner’s fixed or variable label length control for this sym
-
bology type.
• Example ‘s1234567890’
PDF 417
• Prefix must be ASCII character ‘P’
• Label length excluding prefix character cannot exceed 2714 characters
+3, or 2717 characters. In addition to this, label length excluding prefix
character must meet requirements imposed by the main scanner’s fixed or
variable label length control for this symbology type.
• Example: ‘Ppdf test label’
AIM Formats
AIM specifies a 3-character string that is attached as a prefix to the label data
for transmission. Because AIM specifies one identifier for UPCA, UPCE and
To Next Page
Loading...
