Enter/Exit Programming Mode
Product Reference Guide
271
Global AIM ID Enable
This option enables or disables the addition of the AIM ID to all bar code types
except for EAN 128.
To set this option:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Global AIM ID = Disable
Global AIM ID = Enable
DEFAULT
To Next Page
Loading...
