Enter/Exit Programming Mode
Product Reference Guide
439
QR Code URL Link Enable
Enables/Disables the decoding of QR codes with a URL link on imagers other
than the optional Customer Service Scanner (CSS).
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
QR Code URL Link = Disable
QR Code URL Link = Enable
DEFAULT
To Next Page
Loading...
