Scale Features Enter/Exit Programming Mode
Product Reference Guide
155
Scale Sentry Override Button
This option allows a press of the Scale Sentry Override Button to manually clear
a Scale Sentry event.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Scale Sentry Override Button = Disable
Scale Sentry Override Button = Enable
To Next Page
Loading...
