Enter/Exit Programming Mode
Product Reference Guide
369
Code 128 Correlation
Enables/disables character correlation for Code 128.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Code 128 Correlation = Disable
Code 128 Correlation = Enable
DEFAULT
To Next Page
Loading...
