Enter/Exit Programming Mode 1D Symbology Programming
356 Magellan™ 9300i / 9400i Scanners
Code 39 Correlation
Enables/disables character correlation for Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
Code 39 Correlation = Disable
Code 39 Correlation = Enable
DEFAULT
To Next Page
Loading...
