Datalogic Magellan 9300i User Manual

94 Magellan™ 9300i / 9400i Scanners
Bar Code Mask
Cut a hole in this page and remove it from the manual as indicated to create a
sleeve through which bar codes (starting in the following section) can be indi
-
vidually viewed and scanned. It is important that only one bar code at a time be
presented to the scanner.
1. Bar Code Mask Sheet 3. Manual (folded)
2. Bar Code
1
2
3

Datalogic Magellan 9300i Specifications

General

Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Standard interfaces	RS-232
Connectivity technology	Wired
Product color	Black, Grey
Built-in display	No
Sustainability certificates	RoHS

Weight and Dimensions

Weight	- g