Datalogic Magellan 9300i - Databar Expanded EAN-128 Emulation

Enter/Exit Programming Mode
Product Reference Guide 343
DataBar Expanded EAN-128 Emulation
Enables/disables EAN 128 emulation for DataBar Expanded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DataBar Expanded EAN-128 Emulation = Disable
DataBar Expanded EAN-128 Emulation = Enable
DEFAULT
04D500(CR)
04D501(CR)