Datalogic Magellan 9300i - Digital Watermark (DWM) 2 D Time

Scanning Features Enter/Exit Programming Mode
Product Reference Guide 133
Digital Watermark (DWM) 2D Time
This feature specified the maximum time for 2D digital watermark decoder to
process an image
• Digital Watermark Decoder Timeout = .04 seconds
• Digital Watermark Decoder Timeout = .1 seconds
• Digital Watermark Decoder Timeout = .25 seconds
• Digital Watermark Decoder Timeout = .5 seconds
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
NOTE
The Digital Watermark feature must be enabled for decode func-
tionality.
Digital Watermark Decoder Timeout = .04 seconds
Digital Watermark Decoder Timeout = .1 seconds
Digital Watermark Decoder Timeout = .25 seconds
Digital Watermark Decoder Timeout = .5 seconds
DEFAULT
04910028(CR)
04910064(CR)
049100FA(CR)
049101F4(CR)