Product Reference Guide 423
2D Symbology Programming
2D Symbologies
The following pages contain configuration information concerning the various
2D bar code types (symbologies) the scanner supports.
NOTE
If the scanner’s interface type must be changed, always be sure
that interface configuration is the FIRST item scanned during a
programming session. (Selecting an interface type resets ALL
other configuration items — including symbology programming
— to the factory default for that interface type.)
DATA MATRIX starting on page 424
PDF 417 starting on page 428
MICRO PDF 417 starting on page 432
QR CODE starting on page 436
MICRO QR CODE starting on page 441
AZTEC CODE starting on page 444
To Next Page
Loading...
