Datalogic Magellan 9300i - Databar Omnidirectional;Ean-128 Emulation

Enter/Exit Programming Mode 1D Symbology Programming
334 Magellan™ 9300i / 9400i Scanners
DataBar Omnidirectional/EAN-128 Emulation
Enables/disables the ability of DataBar Omnidirectional to be transmitted as
EAN-128.
1. To set this feature:
2. Scan the ENTER/EXIT Programming Mode bar code.
3. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
4. Complete the programming sequence by scanning the ENTER/EXIT Pro-
gramming Mode bar code.
DataBar Omnidirectional/EAN-128 Emulation =
Disable
DataBar Omnidirectional/EAN-128 Emulation = Enable
DEFAULT
04D400(CR)
04D401(CR)