Enter/Exit Programming Mode
Product Reference Guide
307
EAN-8 Stitch Exact Label Halves
This setting enables the stitching of exact EAN-8 label halves with no overlap-
ping characters.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
EAN-8 Stitch Exact Label Halves = Disable
EAN-8 Stitch Exact Label Halves = Enable
DEFAULT
To Next Page
Loading...
