Datalogic Magellan 9300i - Expand UPC-A to EAN-13

Enter/Exit Programming Mode 1D Symbology Programming
288 Magellan™ 9300i / 9400i Scanners
Expand UPC-A to EAN-13
Enables/disables expansion of UPC-A labels to EAN/JAN-13.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Expand UPC-A to EAN-13 = Disable
Expand UPC-A to EAN-13 = Enable
DEFAULT
004300(CR)
004301(CR)