Scanning Features Enter/Exit Programming Mode
Product Reference Guide
141
2D Contrast Improvement
This feature enables / disables the scanner’s ability to enhance the image con-
trast for scanned 2D symbologies.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan your selection from the bar codes below. You’ll need to cover any
unused bar codes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
2D Contrast Improvement = Disable
2D Contrast Improvement = Enable
DEFAULT
To Next Page
Loading...
